How To Make A Cushion For Your Dog, Cat, Pet

Do you love pets? You see pets as your soulmate. A handmade cushion bed will protect your puppy and kitten. Let's make a pet bed below to decorate the family's living space.
How to make mattresses for dogs and cats
Just take advantage of the objects that seem to be thrown away in the house, you will have an impressive dog bed. Right below, invite you to perform

.
Prepare the tools
Green spandex, white, brown, brown horizontal stripes
Cotton stuffed inside
Scissors, pins
Sewing needles and thread
How to make a lovely dog cushion
Step 1
First, cut the green cloth into 2 sheets to make the frog's head, 77 cm wide and 60 cm high. Cut a white sheet with a width of 60 cm and a height of 44 cm. Cut a horizontal stripe fabric 43 cm wide and 33 cm high
Place a stack of horizontal stripes on the middle of the white sheet, hold the pin in place, then stitch the edges of the fabric.




Step 2
Next, place the white cloth on the right side of the blue cloth, hold the pin firmly and stitch the border of the fabric around the white cloth.
Step 3
Cut off the white cloth to make the white irises and the brown cloth to make the irises of the frog eyes, place the irises on the white irises and sew the edges of the fabric. Then, you put your eyes on the green cloth and sew it on.
Step 4
Apply the right side of the second blue cloth on the right side of the first blue cloth, stitching the border 0.5cm - 1cm from the edge of the fabric, leaving a middle section below to leave the right side facing out.
Step 5
Turn the right face out, use the nose to pull diagonally across the two corners of the frog eyes. Sewing along the edge of the fabric, leaving the middle below to leave the stuffed inside
Step 6
Stuffed in the middle of the horizontal stripes and sewed gaps.




So the cat has a comfy bed!
Step 7
Finally, you stuffed inside the outer circle and closed the gap is complete. Beautiful cats no longer worry about being cold in the cold winter anymore!
How to cushion dogs from old clothes
The steps to sewing a square pet cushion like this are very simple. Even if you are a beginner to learn sewing, just having a sewing machine will not make you any more difficult.
Materials to be prepared
+ The fabric is not stretchy, the material is neither too thick nor too thin, the pattern and color are completely up to your taste.
+ A small piece of leather cloth
+ Stuffed cotton
+ Only colors that match the fabric color
+ Basic sewing support tools: sewing machine, scissors, pins, hand-sewing needles, iron
The steps are also very easy
Note: Remember to wash your fabric before you begin doing so that the fabric shrinks before cutting and sewing. Skipping this step can change the size of the bed and the seams lose its smoothness if you wash it after it's done.
Step 1: Cut the fabric
Determine the size of the size of the cushion for your dog.
Cut two pieces of cloth for the top and bottom of the mattress.




Cut four pieces of cloth for the side of the cushion. The length of the panels on the right side is equal to the length of the edges of the cloth on the top and bottom. The height of 4 side cloths is about 15 cm.
(Note when cutting add all the edges 1 cm seam offline).
Step 2: Sewing the handles for cushioning
Cut two pieces of leather strap about 25 cm long and about 4 cm wide. If your leather cloth is thick, you may only need to cut 1 piece. Or if there is no leather fabric, you can still sew a handle with regular fabric.
Apply the right side of the two pieces of leather together, and sew a line around the edges.



The line is only 0.5 cm from the edge of the fabric. For leather fabrics, you should use a little larger thread and thread density is also less sparse when sewing ordinary fabric
Next, you determine the middle of a cloth on the front that will sew the handle by folding the cloth in half and marking the middle point with a pin. Place the handle in the middle of the handle and attach a temporary tape to fix the position of the handle and at the same time create and keep the handle curvature. You should not use a pin because it will leave holes in the skin.
Then, on both sides of the handle, you have a square and an X to make sure it is also decorative.
Step 3: Sew the sides
The only part that is a bit difficult when sewing this cushion is sewing the corners. Because it is a 3D angle, you have to use some special techniques so that the fabric does not shrink at the corners.




When sewing seams together, you put their right faces together, sew a line 1cm away from the edge of the fabric, make sure that the ends are at the ends, but note that at the beginning and end of the stitch, let Leave the paragraph 1 cm. After the sewing is done, use the iron to turn the stitches so that it is flattened.
Step 4: Sew the top and the bottom to the sides
Take a cloth from the top or bottom of the pin to the side. You will pin and sew each side of the cloth and leave 1 cm at each end. The seam is 1 cm from the edge of the fabric. Make turns to do each edge until all 4 sides are finished.
Similarly, you also sew the 4 edges of the remaining cloth to the sides. But at the very end, leave a paragraph for padding and stuffing.



This section will be sewn on after stitching.
Step 5: Stuffed
After.

. Dịch vụ: Thiết kế website, quảng cáo google, đăng ký website bộ công thương uy tín