To protect the car as well as eliminate the noise of the cabin, many people find the coating measure as a rescue - however there are things that users also need to note.02: 00/5: 40 nam nam 0000: 00/10: 48Poops of car roaring is one of the measures to prevent noise, in addition to other ways of making soundproofing, rubber gaskets, ... so should I paint the car roar? ? What is the note to know when doing? What is the car coating? What is the painting? The coating is a method of spraying the whole surface of a dedicated paint
. This paint is capable of reducing noise from the factors that affect vehicles such as tiles, stones, dust, ..
and protect cars from rust, abrasion, increase chassis , makes cleaning more easily, increasing the aesthetics for roaring. The car's painting of cars is a place to take a lot of impacts from the outside environment. Especially the sedan / hatchback models are quite low, so it is very susceptible to external conditions such as rugged terrain, stone gravel, dirt, ... all are the reason why the car is fast degradation, rust, scratching, corrosion, deformation. To protect the car as well as remove the noise of the cabin, many people find the coating measure as a rescue. The specific period as in Vietnam also affects the details of the car made from metal. Sunny rain is erratic, flooding will make the car easily worn, the item gradually, appears the rust layers. Wherby the car will focus on many important details such as the support frame, cluster wrong, suspension, exhaust pipe, wheel system, the-post shaft,
.. so the coating paint will help limit the adverse effects on the operation mechanism as well as many other parts of the vehicle , protect the car, help prevent rust and moisture resistance, reduce noise as well as limit the scratches of the underground paint due to the actors such as stones, gravel, insulation, restricting heat absorption from the road surface In the car. Besides, it also helps extend the life and increase the aesthetics for the vehicle system.Whi should cover the car? Normally the noise-resistant coating should be performed when buying cars and old cars with a rust lighting. To increase competitiveness, universal models, cheap cars are usually only produced by the manufacturer with high quality coating, thin paints. After a short period of time, it will be peeled, the car is fast to the level. The technical expert advises that even new cars should also be painted because the car is still in good condition, has not been worn In terms of influence, the paint process will be faster and simpler, more cost-effective, help the car is best protected. In the case of cars that have been used for many years, the car appears to appear rust, the owner Need to remove streaks and coating immediately. If not rusting, the ribbon will spread, affecting the details under the chassis and the chassis texture. The coating process is basically, the car coating process will consist of 3 steps: defense Born, cleaning the details of the non-painted coat details 1: Cleaning, cleaning the first car, the worker will prepare spray paint, remove wheels, nuts, shields, ... sub-details The area related to the car to the next operation is more convenient. Then spray high pressure water spray to clean the chassis and remove all rustes, stains cling to and wipe away. Scewea 2: Conduct shielding, wrap the details of not paint after cleaning The chassis, the whole 4 tires, roaring three-shocking, ... the worker will use dedicated nilon to shield the position in the ear before the right, the area does not need paint. Check the entire closed doors, get up the glass completely.Step 3: Spray the car with a dry car, the worker uses the paint spray gun to spray on the surface. Note Do not spray into the location of shock absorber, fuel tank, engine area, exhaust pipe, the more A. Spray in the order from the previous backwards, proceed to spray the next layer (if any), pay attention to the location Hidden, difficult to spray. Finally, check the entire chassis, clean cleaning again. Wher good car coatings? On the market today there are many different types of coatings. To choose a good product, you need to check the stamp carefully, information on the packaging, clear origin. Avoid buying poor quality, cheap. Besides, car owners also need to choose a prestigious coating, experienced workers in the profession. The following we will summarize some of the most prominent products for reference readers. 3m roaring cover is a product originating from the US, to be repaired by many advantages by: antioxidant , abrasive and rust. Help limited vibration, shocking, noise from car roaring. It is resistant to impact and scratch well, and protect the car in advance the impact of water, mud, stone gravel Splashing, ... Effective spray fast, easy, fast dry, high adhesion, long lasting. Extend the life of the car. WUT in the coat of cars in automotive, Wurth of Germany is a favored brand by consumers. This type of coating has highlights such as increasing life span as well as . Dịch vụ:
Thiết kế website,
quảng cáo google,
đăng ký website bộ công thương uy tín
